SeCURITY WeBSITE BY ZYXEL _one Security
Have not looked at it yet but its potentially a worthwhile site for documentation to setup firewalls for different purposes, amongst other uses. http://onesecurity.zyxel.com/
View Articledefault session per host set to 1, can't connect to router
We made a mistake and set "default session per host" to 1, and now we are getting message "Connection refused" and can't connect to router. We tried through console port, and disconnect router from...
View ArticleZywall 2 plus config to new USG20
Hello, First of all i wish to say that im newbie in networking so i will need help. In my company we have old Zywall 2 plus that will be changed with new USG20 As our network is kinda wierd i was...
View ArticleBandwidth throttling and QoS on a ZyXEL USG 50?
Hello I want to enable bandwidth throttling on my network. We have a a very slow connection and too much people are using programs that use a lot of internet bandwidth and its slowing everything down....
View ArticlePHASE 2 Policy error on L2TP VPN link between USG 20 (3.30 fw) and ios 10.3
Hello everyone, I would appreciate your help with the following problem I am facing on the old version of USG 20 with firmware 3.30. I am using an iphone 7 (ios 10.3.X) and I am unable to establish a...
View ArticleZyxel Zywall 310 L2tp VPN to HQ then to Branch Routing Q
Hi there am after routing help with this IPsec VPN to branch - setup as per user guide "USG310_V4.25_Ed1.pdf" working ok L2tp/IPsec VPN for remote to users - setup as per user guide...
View ArticleBandwith mgmt on VPN tunnel
Hi All, I have configured 2x USG100 Firewall for IPSEC site-to-site VPN at my home and at my parents home. This connection let my brother connect to the NAS device I setup and give me also the ability...
View ArticleUSG110 IPSec VPN with hosts on different subnets
Have a situation where the Remote Policy is set to 192.168.x.x and the same connection has a host on 10.x.x.x -- what can I do? I can only specify one Remote Policy host, cannot use a group. The other...
View ArticleUnable to access USG40W Web configurator via VPN
Hi, after I updated from firmware 4.15 to 4.20, I can't access the web config via VPN/tunnel. I can see the login screen, but I get javascript errors and/or infinite wait after logging in. There are no...
View ArticleHelp! ? VLANs in USG110+NXC2500+GS22xx+GS19xx+NWA5123 (WiFi)
So, I'm totally new to Virtual LANs and shouldn't really be doing this at all, but this is what I was put up to do, and so here we are! (Besides, one has to start somewhere!) So, I have a network...
View ArticleV4.25 Patch 1
Patch 1 is at myzyxel. http://www.zyxelforum.de/viewtopic.php?f=318&t=11737
View ArticleUSG 40W L2TP/IPsec VPN Win7 / Tunnels is formed but no connection
Hello! Any help with this issue is greatly appreciated. I am trying to get L2TP IPSec VPN working, following multiple instructions. I am at the point, where on USG side it says tunnel is formed, but...
View Articleloop back
the loop back is working in a 1:1 nat, but when I create a policy route to send all traffic from the server out the WAN using a specific public IP the loop back stop working, but I can still connect...
View ArticleTurn pk5001z into an access point via ethernet cable
Hi, In the archives I found a old (how to) post but could not reply to it (it was to old) it is shown below. In advanced settings Disable DHCP = no problem. But then what do I do in Static Routing? And...
View ArticleUsing AppPatrol for added security
Hi guys. I'm aware that AP is primarily for enforcing productivity and bandwith rules in business enviroments but since I'm a home user I don't need to enforce those things. Currently I'm using AP to...
View ArticleZywall 5 Unable to Handle Optimum Online 60Mbps
I have been doing some speed test testing here at dslreports, and I believe I have determined that my Zywall 5 is severely limiting my throughput. With the Zywall in use I get 40Mbps or less down (even...
View ArticleUSG110 + 2 HP 2530-24G + VLAN
Hi Guys, I need some help with USG110, VLANs and 2 HPE 2530-24G, i'm new to Zyxel, i have a company that was one USG110 and we are putting new HEP switchs and want to use the Zyxel USG110. This will be...
View ArticleCopying Zywall 110 config to Zywall 310
I have a configured Zywall 110 and I want to connect my new Zywall 310 to the 110 so I can see both configurations side by side on two monitors. How do I set up ports and addresses on each so that I...
View ArticleP-660HN-F3Z - upload closing connection?
Hi, Iam little desperate because Iam facing a bit delicate trouble with P-660HN-F3Z ADSL router, which is otherwise running good, downloading, online gaming, browsing, uploading 2+MB pictures over...
View ArticlePort Scan at DSLR
I could be "miss remembering", but didn't there used to be a Port Scan tool here at DSLR? If not or it's no longer available, can anyone suggest one? Thanks!
View Article