Hi all, I'm trying to set up my USG20 for SSL VPN. At this point, I can connect to the VPN and access the ZyWall using its private IP address, but I'm unable to see anything else on my network. The USG20 is in full tunnel mode, but I suspect I'm either messing up the subnetting or don't have the correct routing. Here is my setup:
Local network of the ZyWall: 192.168.1.0/24
ZyWall IP address: 192.168.1.1
USG20's VPN global settings Network Extension Local IP: 192.168.200.1
IP pool for Network Extensions (full tunnel mode): 192.168.10.0
As far as I can tell, my firewall rules are OK (I have a rule to allow from "SSL_VPN" to "any"), but the necessity for 3 subnets (my usual 192.168.1.0, the 192.168.200.0 in the global settings, and 192.168.10.0 from the network extensions IP pool) has me pretty confused. For what it's worth, I'm being assigned an IP address of 192.168.10.1 when I connect through the VPN.
Any help would be greatly appreciated!
↧