VPN with overlapping Subnet
Dear experts I'm trying to configure an IPSEC VPN between two offices. Office A - uses Subnet 1 = 10.7.7.0/24 ; FW Zyxell Zywall USG 1000 Office B - uses Subnet 2 = 10.8.8.0/24 ; FW unknown. Now Subnet...
View ArticleZyxel USG60W about acces
Hello guys! I have the following setup LAN1_outgoing with content filter enabled and app patrol enabled. SO users cant acces web sites I restricted and use utorrent and tor stuff like that. What I need...
View ArticleZyxel USG60W logs question
Hello again guys! With your great help I made a lot of progress! Thank you very much. I have another question which is , for example when I go to Monitor- session monitor I see a lot of IPs in my...
View ArticleUSG60W FTP problem
Hey again guys!!!! I have a weird problem My setup is - Server 2012 IIS - FTP. No ssl. Network - ALG - enabled and transformations enabled. Nat Server - interfaCE- WAN2 - ORIGINAL IP-WAN2IP- MAPPED IP...
View ArticleIPSec VPN Keeps reconnecting after disconnect - IKEv2 etc
Hi all, I've set up IPSec VPN with IKEv2 between a USG60 and a USG110. The USG60 will be taken to different sites and thus will have various dynamic IPs, but still needs to connect back to the USG110....
View ArticleVPN question.
Hello again guys! Now I have a weird problem with vpn. So my vpn is setup on WIndows server 2012. ppoe I guess. In logs when im trying to connect i have the following where xxxx -is the router ip. HOW...
View ArticleWeird VPN Request
I currently have a IPsec tunnel established between a USG 100 and a USG 50. USG 100 is acting as the Remote Access (server) and USG 50 is in Remote Access (client) mode. I guess I went with this way...
View Articleusg failover with port rules
Do any of the usg failover replicate any firewall/nat rules to the secondary? I have been looking for such a device.
View ArticleBlocking Samsung TV firmware updates using Zyxel's 'Eircom f1000' VMG8324-B
Please note to fix Wi-Fi in the past, using Dermot McDonnell's guide I have previously unbranded this router to remove the Eircom firmware and it now runs the latest (at least at the time) Zyxel...
View ArticleZyxel USG 20w - Reset to Factory Defaults?
Hi all, I have a Zyxel USG 20w and I messed up either upgrading/downgrading the firmware, or messing with the config files - it can't retain my password (and reverts back to the preset after each...
View ArticleSSL VPN in Full Tunnel mode, no access to local network
Hi all, I'm trying to set up my USG20 for SSL VPN. At this point, I can connect to the VPN and access the ZyWall using its private IP address, but I'm unable to see anything else on my network. The...
View ArticleZyXEL NWA1100-N Firmware Recovery
NWA1100-N failed and I need to perform firmware recovery via internal Serial Port. U-Boot works OK. ---------------------------------------------------------- U-Boot 1.1.4 (Jan 11 2011 - 18:46:16) PB93...
View ArticleZyXel ZyWall USG 50 IPv6 with Time Warner Cable
I spent a few days getting this to work and thought I would post it here in case it helps anybody. There are a few threads on this topic but I believe they are using an old version of the firmware so...
View ArticleCan ZyXEL USG110 or USG60 support TLS 1.2
Hi all, During some testing with a USG110 and USG60 I allowed HTTPS access for management from the LAN (not WAN). I followed the steps from ZyXEL's KB article on enabling strong-cipher suite: Their KB:...
View ArticleUSG40 - R7000 FUN VLAN and WIFI
Playing with an R7000 stock firmware in router mode on the USG40LAN. There is a facility within the R7000 to setup wifi (in this case the 2ghz wifi) in a VLAN mode. So lets say I identify all the...
View Article20+ internet drops a DAY...
I have DSL through my local telephone company (the only internet provider option out here in the country). Just moved and there were no lines here so all the wiring and lines are brand new, and copper...
View ArticleZyWALL USG 100 firwall suddenly out of order partly
The firewall is running well before... today...it suddenly can not run firewall...but vpn is OK... I set firewall as below: priority 1 from WAN to LAN1 schedule none user any soruce any destination...
View ArticleZyXEL AMG1302-T10B Router: Username and Password won't change!!
I'm using my ZyXEL AMG1302-T10B Router to try and get online whilst my ISP gets my new router to me (I've moved house and changed ISP). I can log in to the router control panel and I've been through...
View ArticleHow to Route Internet over IPsec Tunnel
i have one USG110 and one USG60 where the USG110 is located in China and the USG60 in Hongkong. As the internet in China is a bit restricted i would like to route the internet for certain ip...
View ArticleNew ZyWALL/USG Firmware 4.15(AAxx.0)C0 released
Note that this firmware currently is wrongly identified at the ZyXEL download sites as 4.15(AAxx.1)C0, making it impossible to download them. This however is corrected now on the ZyXEL FTP-servers, so...
View Article